Remanufacturing
Lumber Remanufacturing for Wholesalers and Manufacturers
Remanufacturing is our superpower. Highland Lumber & Mill runs two remanufacturing lines, a softwood cut line and a hardwood mill, so you can buy the lumber and the processing from one supplier. Trade only: we sell to businesses, not to the public.
Remanufacturing and finishing, one supplier
Softwood Cut Line
Cut-to-size, notching, groove stock and banding board, resawing, full-round dowels and Raggle Sticks.
Hardwood Mill
Planer S2S & S4S, straight-line ripsaw, sticker/molder runs of any profile, resawing and full-round dowels.
Priming
Lacquer-based primer finished with a 220/320 sand, after the mill or on its own.
Lamination
High pressure laminate and rolled paper & vinyl applied to the panels we stock.
Softwood cut line
Industrial softwood and packaging lumber cut to the parts your crates, pallets and fixtures need.
- Cut-to-size
- Notch
- Groove stock and banding board
- Resaw
- Full-round dowels
- Raggle Sticks
Hardwood mill
Hardwood lumber brought to the thickness, width and profile your machines expect. This is our custom lumber milling.
- Planer: S2S & S4S
- Straight-line ripsaw
- Sticker/molder: custom run any profile
- Resaw
- Full-round dowels
Finish it here too
Remanufactured parts can go straight to lamination or priming, so one team owns the schedule.
- Lamination: high pressure laminate (HPL), rolled paper and vinyl
- Priming: lacquer-based primer with a 220/320 sand
Remanufacturing by material
| Material | What we do with it |
|---|---|
| Industrial softwood | Cut-to-size, notch, groove, resaw and cut banding board on the softwood cut line |
| Crating and packaging lumber | Cut, notch and groove crate and pallet components to your drawing |
| Hardwood lumber | Plane S2S or S4S, straight-line rip, resaw and run profiles on the hardwood mill |
| Molding | Run any profile on the sticker/molder, raw or primed |
| Shutter components | Make F/J parts, prime, fill defects after the first coat and sand to spec |
Start a project
- Call or text (714) 778-2293 or send a quote request.
- Send species, drawings or dimensions, quantity and your needed-by date.
- Tell us which line the job needs: the softwood cut line, the hardwood mill, or both.
- Add lamination or priming if the parts need them.
- Choose pickup or delivery.
Frequently asked questions
Can you remanufacture and prime the same order?
Yes. Put the remanufacturing and the priming on one quote request and sales will schedule them together.
Put remanufacturing on one quote
Send the material, the processing and your needed-by date together, and sales will follow up with a combined quote.
Get a quote
Tell us what you need and sales will follow up.
Or call or text (714) 778-2293 · [email protected]